Black Box ServSwitch ServView 17 Series Manual page 52

ServView 17 Enterprise KVM Drawer
Miscellaneous Remote Console Settings
Start in Monitor Mode
Sets the initial value for monitor mode. By default monitor mode is off. If you switch it on
the Remote Console window will be started in view only mode.
Start in Exclusive Access Mode
Enables exclusive access mode immediately at Remote Console startup. This forces the Re-
mote Consoles of all other users to close. No new user can open the Remote Console until
this user disables exclusive access or logs off.
Mouse hotkey
Allows you to specify a hotkey combination which starts either the mouse synchronization
process if entered in the Remote Console, or is used to exit single mouse mode.
Remote Console Button Keys
Button Keys allow the simulation of keystrokes on the remote system that cannot be gener-
ated locally. The need for this might be due to a missing key or the fact that the local operat-
ing system of the Remote Console is intercepting the keystroke. Typical examples are "
Control+Alt+Delete " on Windows and DOS, or "Control+Backspace" on Linux for terminat-
ing the X-Server. The syntax to define a new Button Key is as follows:
[confirm] <keycode>[+|-[*]<keycode>]*
"confirm" requests confirmation before the key strokes are sent to the remote host.
"keycode" is the key to be sent. Multiple key codes can be concatenated with a plus, or a
minus sign. The plus sign builds key combinations, all keys will be entered until a minus sign
or the end of the combination is encountered. In this case all entered keys will be released in
reversed sequence. The minus sign builds single, separate key entries and releases them. The
star inserts a pause with duration of 100 milliseconds.
49