3.2 Password
The password is disabled by default (i.e. There is no password required when you power on
the KVM switch for the first time)
■ Enable password.
1.
Enter the KVM hotkey Scroll Lock + Scroll Lock + U
2.
Logout of the KVM switch by entering the hotkey Scroll Lock + Scroll Lock + P
3.
In SUPERVISOR level, enter "00000000" eight zeros in the user name & password field
(Do not use the "0" on the number pad)
In USER level, enter Space bar + Enter in the user name & password field
4.
Note: Automatic logout after 10 minutes of inactivity
■ Set your own user name & password.
1.
Login to the KVM switch in SUPERVISOR level by entering "00000000" eight zeros in user name &
password field.
Call the KVM OSD menu by entering the KVM hotkey Scroll Lock + Scroll Lock + Space Bar.
2.
3.
Enter F1 to view the MAIN MENU.
4.
Select "USER SECURITY".
5.
Set password in SUPERVISOR & USER level.
a. In the top-left row "S" (SUPERVISOR), press Enter to set your own user name & password.
b. In the row 1 to 8 (USER), press Enter to set your own user name & password.
Press Enter to save the settings or press Esc to cancel without saving.
6.
Note: a. Blank has an underscore, while SPACE does not.
b. Enter any alphanumeric key to move to next input item. SPACE is treated as a valid character.
■ Change your password.
1.
Login to the KVM switch in SUPERVISOR level by entering your own user name & password.
Call the KVM OSD menu by entering the KVM hotkey Scroll Lock + Scroll Lock + Space Bar.
2.
3.
Press F1 to view the MAIN MENU.
4.
Select "USER SECURITY".
5.
Change the password in SUPERVISOR & USER level.
a. In the top-left row "S" (SUPERVISOR), press Enter to change your user name & password.
b. In the row 1 to 8 (USER), press Enter to change your user name & password.
Press Enter to save the setting or press Esc to cancel without saving.
6.
Note:
a. Blank has underscore, while SPACE does not.
b. Enter any alphanumeric key to move to next input item. SPACE is treated as a valid
character.
■ Enable password.
1.
Enter the KVM hotkey Scroll Lock + Scroll Lock + U.
2.
Logout of the KVM switch by entering the KVM hotkey Scroll Lock + Scroll Lock + P.
3.
Following this you will not need a user name & password to access the KVM OSD menu.
■ Forget your password.
1.
Please contact Black Box for further support.
Note:
■ You must enter the KVM hotkey within 2 seconds.
■ A beep sound will be heard once you have successfully entered the hotkey.
ServView 17 Enterprise KVM Drawer
15