Enterasys Vertical Horizon VH-2402S2 Hardware Installation Manual page 20

Part Number
VHIM100-S2MFX
VHIM100-S1SFX
VHIM1000-S1SX
VHIM1000-S1LX
VHIM1000-S1TX
VHIM1000-S1GM
VH-STACK2
VH-SMGMT2
6 Product Overview
Table 1-2. Optional Module Components
Function
100Base-FX
(MMF)
100Base-FX
(SMF)
1000Base-SX
1000Base-LX
1000Base-T
GBIC
Stacking
Management
Components
Ports: Two multi-mode fiber ports using SC
connectors for uplink. (See 100Base-FX/
1000Base-SX/LX Fiber Ports on page 30 for
a detailed description.)
Ports: One single-mode fiber port using SC
connectors for uplink. (See 100Base-FX/
1000Base-SX/LX Fiber Ports on page 30 for
a detailed description.)
Ports: One fiber port using SC connectors for
uplink. (See 100Base-FX/1000Base-SX/LX
Fiber Ports on page 30 for a detailed
description of these ports.)
Ports: One fiber port using SC connectors for
uplink. (See 100Base-FX/1000Base-SX/LX
Fiber Ports on page 30 for a detailed
description of these ports.)
Ports: One twisted-pair copper port using
an RJ-45 connector for uplink. The port
supports auto MDI/MDI-X wiring. (See
page 30 for a detailed description of these
ports.)
Ports: One slot for a GBIC transceiver for
uplink.
Ports: Two SCSI II ports for stack uplink and
downlink connections.
One 32 cm cable included with the stacking
module.
Console port: Male DB-9 connector
configured as a standard RS-232
connection for serial out-of-band
management using the console menus.
VH-2402S2