Carrier 40ZS Series Installation, Operation And Maintenance Instructions page 14

9 - OPTIONS
Kit assembly:
When the frame with the electrical heaters is provided in a kit,
follow the steps below for connecting it:
Step 1: lay down the frame on the panel to set the hole locations
that will fi x said frame to the panel. Another hole must also be
drilled to connect the hose to the electric power supply.
If it is not possible to perform the previous step, the distance
between holes, as well as the frame dimensions, are displayed
in the following schemes:
40ZS/ZF - 90 / 100 / 120
I J J K
F G H
B
40ZS/ZF - 160 / 180 / 182 / 200 / 240
I J
F
40ZS/ZF - 320 / 360
I J J
F
G
14
J J K
G H
B
J J J J J
H
G
B
Centrifugal fan (standard):
40ZS/ZF A B
90 / 100
648 946 145 443 60 165 482 299 217 204 320 128 476 43
120 648 946 113 443 92 115 482 349 167 204 370 96 476 75
160 / 180 648 1276 46 443 158 81 1142 53 133 356 75 30 476 142
182 / 200
648 1900 161 443 44 379 1142 379 430 356 400 146 476 27
240 648 1900 133 443 72 379 1142 379 430 356 400 116 476 55
320 / 360 711 2560 108 443 160 58 1142 160 79 356 264 91 476 143
Plug-fan (optional):
40ZS/ZF A B
90 / 100
648 954 95 443 112 236 480 236 259 204 287 80 473 95
120
648 954 95 443 112 236 480 236 259 204 287 80 473 95
160 / 180 648 1276 46 443 158 81 1142 53 133 356 75 30 476 142
182 / 200
648 1900 133 443 72 379 1142 379 430 356 400 116 476 55
240
648 1900 133 443 72 379 1142 379 430 356 400 116 476 55
320 / 360 711 2560 108 443 160 58 1142 160 79 356 264 91 476 143
Step 2: fasten the frame to the panel with self-tapping screws.
Step 3: insert the hose
through the drill made
for the connection to the
indoor electric panel of
the unit.
Important: The connection
of the necessary elements
for the adequacy to the
handling of the unit must
b e p e r f o r m e d b y t h e
installer.
Step 4: close the access
panel. The outlet is ready
for ducting.
I
H
Access panel
C D E F G H I J
C D E F G H I J
K L M N
K L M N