Advantech ITA-1611 Series User Manual page 44

4.2.2.6 IDE Configuration
 Serial-ATA
Default setting is "Enabled", which enables all SATA resources.
 SATA Test Mode
Default setting is "Enabled", which enables SATA signal testing mode.
 SATA Speed Support
Default setting is "Gen2". Select "Gen1" or "Gen2" to change SATA transferring
rate.
 SATA Mode
Default setting is "IDE Mode". Users can select "IDE Mode" or "AHCI Mode".
ITA-1611 User Manual
Figure 4.9 IDE configuration
34