Adding Medication And Assembling The Parts - Omron comp AIR NE-C24 Instruction Manual

5330306-9F_IM-NE-C801S-RU-06-11-2019.book Page 11 Tuesday, March 17, 2020 10:30 AM
3.2

Adding medication and assembling the parts

1.
Remove the mouthpiece and cap from the
nebulizer kit.
2.
Remove the inhalation top together with
vaporizer head from the medication tank.
1)
Rotate the inhalation top anti-clockwise.
2)
Lift the inhalation top out of the medication
tank.
3.
Add the correct amount of prescribed medication
to the medication tank.
Caution:
The capacity of the medication tank is 2 to
7 ml.
Note: Scales on the nebulizer kit are for
reference only. The scale on the outside of the tank is with no
vaporizer head in place. Please use the scale on your syringe or vial
for accurate measurement of medication.
4.
Make sure that the vaporizer head is
securely attached to the inhalation top.
5.
Put the inhalation top back inside the
medication tank.
1)
Align the protrusion on the inhalation top with
the indent on the medication tank, as shown.
2)
Rotate the inhalation top clockwise and align
with the medication tank until they click in
place.
3. Preparing the nebulizer for use
EN
11