Timeguard TS840 Quick Start Manual

TS840 7 Day Segment Timeswitch
Switching
indicator &
self-cancelling
override
1=ON
0=OFF
1
Protective
lobes
Time control segments 1 tappet = 2 hours
Push towards programme ring = ON
Push away from programme ring = OFF retardant casing
Setting Instructions
Turn the segment dial clockwise until the correct day and time of
Time
day is showing directly above the time indicator (the illustration
indicator
shows 11.00 on Wed (III). Decide what time you would like the
time controller to switch your appliance ON and OFF. Simply
7 Day
push the segment tappets towards the time ring to set your ON
programme
times and away from the time ring for your OFF times. (The
ring
2
I=Monday
illustration above shows the time controller set to switch ON at
VII= Sunday
8.00 hours and OFF at 16.00 hours on Wed (III)). These settings
automatically operate the switching indicator when the time
Front socket
controller is in its operating condition. The switching indicator
face
will show the switching condition 1=ON. 0= OFF. Minimum
setting intervals = 2 hours (one tappet segment).Minimum time
between settings = 2 hours.
Tough flame
Check your programme by manually turning the segment dial
through a 7 day cycle. Remember to re-set the dial back to the
correct day and time of day. Simply plug the time controller into
a socket and plug the appliance into the time controller. Switch
on the socket and the appliance. The time controller is now in its
operating condition.
Manual Override
3
You can switch your appliance ON and OFF at any time by
using the self-cancelling switching rider on the top left of the
unit. Simply turn anti-clockwise so the switching indicator on
the front of the unit is positioned to either the 1=ON or 0=OFF
position as illustrated. The override automatically cancels when
the next ON/OFF programme operates.
ON
Switching ON before selected time
4
OFF
Switching OFF before selected time
Switching
rider