Boost Boost Button Fig. 1 TGBT6 Front Contents TGBT6 Boostmaster. Instruction leaflet. The TGBT6 is a plug-in boost timer giving a range of boost times from 1/4hr to 2hrs covering the majority of requirements for heating, ventilation and lighting. The unit plugs into a 13A socket.
Page 3
2. Operation Plug the TGBT6 into a 13A socket and plug the load into the TGBT6. The required boost time is selected by pressing the button marked Boost repeatedly. The LED’s adjacent to the time markers (above the Boost button) will light up in the sequence:- First push gives 1/4hr boost (LED opposite 1/4 is on) Second push gives 1/2hr boost...
Page 4
Stopping or Increasing Boost If it is less than 15 seconds since the Boost button was pressed the boost may be stopped at any time by pressing the Boost button repeatedly until all the LED’s are extinguished. After 15 seconds the boost may be stopped by a single press of the Boost button.
020 8450 0515. Note: A proof of purchase is required in all cases. For all eligible replacements (where agreed by Timeguard) the customer is responsible for all shipping/postal charges outside of the UK. All shipping costs...
Page 6
For assistance with the product please contact: HELPLINE 020 8450 0515 or email helpline @ timeguard.com www.timeguard.com For a product brochure please contact: Timeguard Limited. Victory Park, 400 Edgware Road, London NW2 6ND Sales Office: 020 8452 1112 or email csc @ timeguard.com...
Need help?
Do you have a question about the TGBT6 Boostmaster and is the answer not in the manual?
Questions and answers