Table of Contents
Advertisement
4. Setting a Gateway with WEB Browser
The gateway allows users to make settings using a web browser. After opening a browser, enter
Gateway's IP address as the website address in order to enter the Web configuration screen as
shown in the following diagram.
The factory default WAN IP address for Gateway is 192. 168. 1. 2.You can also enter "101" from the
handset to inquire about the current WAN Port IP address. The factory default LAN Port IP address is
192.168.8.254.
Instructions
Open an Internet browser.
Enter gateway's WAN Port IP address in the website address area (If the PC is
connected to the LAN Port, enter the LAN Port IP address. The default is 192.168.8.254)
The following registration screen will appear (The factory default settings for Login ID
and Password are set to blank).
After completing and confirming the settings, some of the settings will take effect
immediately. But network related settings would take effect after the gateway is
restarted. Please go to System Operation to save the settings before restarting the
system.
To avoid several people simultaneously configuring the web and causing problems to users,
please enter the correct Login ID and password. If a user logs into the system, other users from
different IP addresses cannot login at the same time. Please remember to logout or restart the
system if not using the web configuration function.
Network Settings
The network settings are used to set the gateway's communication ports, IP configurations, and
Phone Books Manager IP etc.
14
Advertisement
Table of Contents
