Table of Contents
Advertisement
Web: Enable management from Web if ticked.
CDR Settings
The user can set up a CDR Server to record call detail for every phone call.
The present CDR provides the call detail recording in a text file and imports the text file to prepare for an
analysis report, if needed.
Send record to CDR Server: Enables the call detail recording function.
CDR Server IP: Enter the IP address of the CDR server.
Port: Enter the listen port of the CDR server.
Language
The system provides English, Traditional Chinese, and Simplified Chinese to display text on Web pages.
Meanwhile, it will change the language for IVR (Interactive Voice Response).
Transit Call Control
If you wish to restrict a general user (one who is not required to enter the PIN code) to local calls only
and prohibit him/her from making long-distance calls started with a prefix "0", do the following steps:
1.
Enable the Outbound Call Control function,
2.
Set the PIN code for Outbound Level 5 to blank,
3.
Set the Long-Distance Control Table to correspond with the Outbound Level 5 to prohibit
making any call with the prefix "0" (as shown above).
Note: Transit Call Control is effective when it cooperate with Long-Distance Control Table.
Inbound Call Control: To determine when users make a phone call from a PSTN to
Gateway FXO whether or not they check the inbound PIN code while using a VoIP －
only effective for incoming calls calling from a PSTN trunk.
Outbound Call Control: To determine when users utilize Gateway FXO interface to divert
to a PSTN whether or not they check the outbound PIN code － only effective for
outgoing calls being diverted to a PSTN Trunk.
37
Advertisement
Table of Contents
