Setting A Dvg-5112S With Web Browser - D-Link DVG-5112S User Manual

DVG-5112S User's Manual

3. Setting a DVG-5112S with WEB Browser

DVG-5112S allows users to configure its settings using a web interface (Web UI). You can access the
Configuration Menu by opening a web-browser (e.g., Internet Explorer or Netscape Navigator) and entering the
factory default LAN IP address: 192.168.8.254. The IP address of the Web UI is same as the default LAN IP
noted elsewhere in this user's manual.
You can also use an ordinary telephone, connect it to the gateway, and dial "101" to inquire about the current
WAN Port IP address and then use the WAN port to log-in.
Instructions
Open a Web-Browser (e.g., Explorer, Navigator, Opera, Firefox).
Enter the LAN port IP address. The default LAN port IP address is: 192.168.8.254.
The log-in screen below will appear after you connect. (The factory default settings for Login ID and
Password are blank (i.e., no login ID, no password).)
DVG-5112S does not allow multiple people to configure the gateway simultaneously. Please remember to
logout or restart the system if you are not using the web configuration function.
D-Link Systems, Inc. 10