Telephony Settings - D-Link DVG-4088S User Manual

Telephony Settings

Prefix Number Rules
Trunk Dial Out Verify/ Trunk Dial Out Replace: VoIP gateway will check (verify) the dial
out prefix from dial out numbers and change (replace) the prefix to transit out through
FXO port.
For example:
If you transit out with 01907123456, the system will trans to 190601 907123456. If you transit out
with 008621123456 the system will replace it with 190200 8621123456.
Trunk Dial Out Deny: The system will deny the call with the leading number filled in this
column.
FXS Caller ID Generation: Select this option to enable the caller ID display function.
When enabled, the caller's phone number will be displayed on your phone set when the
call comes through. FSK is preferred in some countries.
FXO Caller ID Detection: To detect the Caller ID delivered from PSTN to the FXO port.
While enabled, the Caller ID detected on the FXO port will be send to the SIP Proxy
Server on dialing out calls.
Detection Level: The gain volume occurs on Caller ID detection.
Note: You have to enable "Wait for Caller ID before FXO / Trunk pick up" to ensure Caller
ID is detected correctly.
FSK Caller ID Type: Select FSK type. In most cases, Bellcore is preferred in North
America and ETSI in Europe.
22