NetApp FAS8200 Manual page 5

unavailable:
a. Retrieve and restore all authentication keys and associated key IDs:
restore -address *
If the command fails, contact NetApp Support.
mysupport.netapp.com
b. Verify that the
Restored
display available:
c. Shut down the impaired node.
3. If you saw the message This command is not supported when onboard key management is enabled,
display the keys stored in the onboard key manager:
a. If the
Restored
▪ Go to advanced privilege mode and enter
▪ Enter the command to display the OKM backup information:
show
▪ Copy the contents of the backup information to a separate file or your log file. You'll need it in
disaster scenarios where you might need to manually recover OKM.
▪ Return to admin mode:
▪ Shut down the impaired node.
b. If the
Restored
▪ Run the key-manager setup wizard:
target/impaired node name
▪ Verify that the
manager key show -detail
▪ Go to advanced privilege mode and enter
▪ Enter the command to display the OKM backup
show
▪ Copy the contents of the backup information to a separate file or your log file. You'll need it in
disaster scenarios where you might need to manually recover OKM.
▪ Return to admin mode:
▪ You can safely shutdown the node.
Verifying NSE configuration
Steps
1. Display the key IDs of the authentication keys that are stored on the key management servers:
key-manager query
column displays
security key-manager query
column displays manually backup the onboard key management information:
yes
set -priv admin
column displays anything other than yes:
Enter the customer's onboard key management passphrase at the prompt. If the
passphrase cannot be provided, contact
column displays
Restored
set -priv admin
for all authentication keys and that all key managers
yes
security key-manager key show -detail
when prompted to continue:
y
security key-manager setup -node
mysupport.netapp.com
for all authentication key:
yes
when prompted to continue:
y
information:security key-manager backup
security key-manager
set -priv advanced
security key-manager backup
security key-
set -priv advanced
security
3