Quell Q946 Manual page 10

0946-7219-00(135997_135998)_V3C.qxd:_
Installation
Alarm Tamper-Resist Feature
• A tamper resist feature has been provided. To activate
this feature you must break out the tamper-resist
blocks on the mounting plate (Figure 4A). Use a small
screwdriver.
• Using this feature will deter children and others from
removing the alarm from the mounting plate.
• The tamper-resist tab will have to be released in order
to change the battery. Using a tool (small screwdriver)
push the tab away from the mounting plate (Figure 4B)
and rotate the alarm anti-clockwise in the "OFF"
direction.
• After installation, test the alarm by depressing and
holding down the Test button for several seconds. This
should sound the alarm.
BREAK
OUT
Figure 4A Figure 4B
9
2013