Before You Start - Pylontech Powercube-H1 Product Presentation

BEFORE YOU START

Before you install. please make sure all the requirements for the insallation location &
environment are met. Please refer to the installation manual and make sure you have all the
necessary tools required.
PLEASE CHECK THE FOLLOWING
The ambient temperature is within the range of 0°C to 50°C.
•
Please DO NOT connect the batteries in parallel;
•
Do not connect battery with PV solar or AC power directly;
•
Cut off the grid power and make sure the battery is in the turned-off mode;
•
Make sure the voltage of the battery system is in the PCS DC Output voltage range .
•
Page 16
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663