Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pylontech P-Combiner-HV-3
Summary of Contents for Pylontech P-Combiner-HV-3
- Page 1 P-Combiner-HV-3/6 Instruction Manual Information Version: 5PMPA08-00154...
-
Page 3: Table Of Contents
This manual introduces P-Combiner-HV-3/6 from Pylontech. P-Combiner-HV is the power combination box for Force-H-V2 series battery system. “-3” is for the model having 3 input terminals and 1 output terminal at 50A current. “-6” is for the type having 6 input terminals and 1 output terminal at 100A current. Please follow the instruction carefully during the installation process. -
Page 4: Safety
1. Safety Read all safety instructions carefully prior to any work and observe them when working on the battery. Incorrect operation may cause: ⚫ Injury or death to the operator or a third party ⚫ Damage to the system hardware and other properties belonging to the operator or a third party. - Page 5 Warning Fire. Do not place near flammable material Read the product and operation manual before operating the battery system! Grounding. Recycle label. The certificate label for CE Label for Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) Label for RoHS direction(2011/65/EU (L 174/88, June 8,2011) and 2015/863/EU) Label for IEC 61439-2 from TUV SUD Label for UL1741 from CSA...
-
Page 6: Eu Declaration Of Conformity
Pylon Technologies Co., Ltd. confirms herewith that the products described in this document are in compliance with the fundamental requirements and other relevant provisions of the above mentioned directives. The entire EU Declaration of Conformity can be found at en.pylontech.com.cn. 1.3 Safety Precautions Reminding 1) It is important and necessary to read the user manual carefully before installing or using. -
Page 7: Specification
4) In case of fire, dry powder fire extinguisher or CO2 fire extinguisher is allowed. Before cutting all power off, water is forbidden to use. 5) Please do not open, repair or disassemble the battery except staffs from Pylontech or authorized by Pylontech. We do not undertake any consequences or related responsibility which because of violation of safety operation or violating of design, production and equipment safety standards. -
Page 8: Equipment Interface Instruction
Basic Parameters P-Combiner-HV-3 P-Combiner-HV-6 Maximum output current 100A Ict current of fuse 10kA/100ms 15kA/100ms Fuse protection breaking capacity 50kA@750V DC Disconnecting switch capacity 12kA@1500V DC Weight 11.5kg 11.7kg Dimension 400*385*200 Working temperature range -20℃~55℃ IP rating/type of enclosure IP55/NEMA 3S... -
Page 9: Electrical Diagram
2）Power Terminal Output Connect to inverter, P-Combiner-HV-3, 6 AWG cable for maximum 50A current P-Combiner-HV-6, 4AWG cable for maximum 100 A current 3）Grounding Point For grounding cable, ensure after connection, the grounding resistance smaller than 0.1Ω 4）Door Lock Using the lock provided together with box. -
Page 10: Safe Handling Of Lithium Batteries Guide
3. Safe handling of lithium batteries guide 3.1 Tools Socket Wrench M8 outer hexagon Screw Driver Wire Cutter expansion bolt M6 hexagon bolt 3.2 Safety Gear It is recommended to wear the following safety gear when dealing with the battery pack. -
Page 11: Installation And Operation
4. Installation and Operation 4.1 Package List Item Description HV-3 HV-6 P-Combiner box (400*385*200, mm) Power connector H4SFC8DM Power connector H4SMC8DM Expansion bolt (M8*60) Power cable 4AWG*2m, SC25-8, orange Power cable 4AWG*2m, SC25-8, black Power cable 6AWG*2m, SC16-8, orange Power cable 6AWG*2m, SC16-8, black Grounding cable 10AWG*1m, yellow-green Power terminal protection cover(set) Wall mounting bracket (372.6*121*20, mm) - Page 12 bracket 4.Fixing combiner box Torque: 1.5-2.5 N.m Tool: Screwdriver Fastener: 4pcs, M4*15 Screw from right side of wall mounting bracket 5. Connect input power cables Ensure Disconnect connect positive and negative cable from BMS to combiner box Power Input Terminal. Switch is OFF Ensure NO reverse connection.
- Page 13 connect positive and negative cable from inverter to combiner box Power Output Terminal. Ensure NO reverse connection. 7.Disconnect Switch A) Switch on ON/OFF 1)Double-check the wiring connection, ensure no reverse connection and wrong connection follow the electric diagram. 2)Close and lock the door. 3)Switch ON the Disconnect Switch, then further power on the BMSs and system follow the battery system operation manual.
-
Page 14: Remarks
4 Remarks Recycle and disposal, follow local disposal rules. Do NOT disposal directly. Pylon Technologies Co., Ltd. Stairs 5 No. 71, Lane 887, ZuChongzhi Road, Zhangjiang Hi-Tech Park Pudong Shanghai 201203, China T+86-21-51317699 | +86-21-51317698 service@pylontech.com.cn www.pylontech.com.cn...