Advertisement
Step 8
SO21 ctr
(26)
The top frame pieces give rigidity to
the walls and provide a surface for
attaching the gables which support
the roof.
1
Fasten the rear wall angle across
the inside top of the rear wall using
screws.
2
Fasten the side wall angles across
the inside top of the side panels us-
ing screws. Side wall angles must
overlap rear wall angle in corners.
3
Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the gure.
STEP
3
Parts Needed For
Top Frames
Wall Angles
Must Face
Inside
Building
STEP
2
10391
9366
STEP
1
5986
21
Door Track Assembly (1)
Rear Wall Angle Assembly (1)
Side Wall Angle Assembly (2)
Long Leg
on Top
Opening
facing in
Short Leg
on Bottom
Advertisement
