Bartscher MSI400 Instruction Manual page 28

Preparing frothed milk
Fig. 1 Remove the lid from the mug.
Fig. 2
Place the milk foaming rod in the mug.
Fig. 3
Pour the desired amount of milk into the mug (not above the
MAX marking of 400 ml). If more milk is poured into the mug, it
may splash during foaming.
Fig. 4 Put the lid on the mug.
Fig. 5
Place the mug on the heating plate. Connect the device to a
single grounded socket.
Fig. 6
To foam and heat milk, press
To foam cold milk, press the button marked
After activating the device, the control light for the relevant button will come on and milk
will be foamed. After a short time (90 to 240 seconds) the device will turn off
automatically, the control light will go odd and the mug may be removed; fill your coffee
cup with cold/warm milk foam.
the button marked
the button marked
for heating milk to approx. 65 ° C,
for heating milk to approx. 70 ° C.
.
- 27 -