Integrated Radio Receiver - Nice ROBO600 Instructions And Warnings For Installation

For sliding gates
Table of Contents

Advertisement

Switches 9 - 10:
Setting a combination of switches 9 and 10, the motor brake procedure is carried out; according to the combination, the intensity of the braking
power is established on the basis of the following setup:
dip9 off     
dip9 off     
dip9 on     
dip9 on      

7.3 - Integrated radio receiver

For remote control operation, the control unit has an integral 433.92 MHz radio receiver compatible with O-CODE coding.
7.3.1 - Memorisation of radio transmitters
Each radio transmitter is recognised by the radio receiver by means of a "code" which is different from that of any other transmitter. There are
two types of memorisation: Mode 1 and Mode 2.
• Mode 1:
automatically assigns the commands indicated in table 8 to the
transmitter's keys.
Each transmitter is memorised in a single step, with all keys pro-
grammed: it does not matter which key is pressed. (One memory lo-
cation is occupied for each key).
N.B.: when memorised in Mode 1, a transmitter can control only one
automation.
Mode 1 memorisation
01.
02.
x 4s
RADIO KEY AND LED
RADIO KEY
• Mode 2:
freely assigns a command among those listed
in table 9.
For each phase, only one key is memorised (the one pressed during
memorisation).
(One memory location is occupied for each key).
Mode 2 memorisation
01.
Step-by-
step
Pedes-
trian
opening
Open
Close
RADIO KEY
N.B.: if you wish to memorise other transmitters, repeat step 03 within 10 sec. The memorisation procedure terminates after 10 sec if no other operations are run
18 – English
dip10 off
dip10 on
dip10 off
dip10 on
03.
within
TRANSMITTER DESIRED BUTTON
02.
x 1
x 2
x 3
x 4
RADIO LED
Table 6
braking off
light braking
medium braking
intense braking
Transmitter key
1
2
3
4
N.B.: single-channel transmitters have only key 1; two-channel
transmitters have keys 1 and 2
x 3s
10s
Transmitter key
1
2
3
4
5
03.
within
10s
within
10s
within
10s
within
10s
TRANSMITTER DESIRED
BUTTON
Table 8
Command
Step-by-step
Pedestrian opening
Open
Close
04.
RADIO LED
Table 9
Command
Step-by-step
Pedestrian opening
Open
Close
Stop
04.
x 3s
x 3s
x 3s
x 3s
RADIO LED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents