Glossary - Nice ROBO600 Instructions And Warnings For Installation

7
PROGRAMMING
In this manual the programming procedures are explained with the use of icons and their meanings are given in the following glossary:
Symbol Description
led on
led off
led flashing
OFF
shut off mains power
ON
turn on mains power
press and release the desired key on the radio
transmitter to be memorized
hold down the desired key on the radio transmitter
to be memorized
release the transmitter key
The control unit has a variety of factory settings which can be reprogrammed: this chapter describes the available functions and how to program
them. Check also chapter 8 "Detailed information".
The control unit is equipped with microswitches, trimmers and the keys described below.
Name
PROGRAM SWITCH
Trimmer TL
Trimmer TP
Trimmer F
RADIO key
PROGRAM key
Symbol Description
Activates a function
Sets the 'Operating Time' parameters (see paragraph 7.1.1)
Sets the 'Pause Time' parameters (see paragraph 7.1.1)
Sets the 'Force' parameters (see paragraph 7.1.1)
Programs the radio receiver
Use for device programming

GLOSSARY

Symbol Description
wait ...
observe / check
press and release the key
hold down the key
release the key
↕
release the key exactly when the led behaves in the
specified manner (on, flashing, off)
correct procedure
INCORRECT procedure
English – 15