Product Specifications - Fujitsu F2MC-8FX Series Operation Manual

6. Product Specifications

■ General specifications
The general specifications of a MCU board is shown in Table 9.
Name
Model number
Power supply
Frequency of operation Max. 16 MHz
Operating temperature
Operating humidity
Dimensions
Weight
■ Functional explanation
The functional specifications of a MCU board is shown in Table 10, and the functional block diagram
is shown in Figure 12.
MCU board function
Switches
Jumper plugs
Clock mounting socket
10
Table 9 General specifications
Item
The MCU board for F
MB2146-301
Evaluation MCU
(MB95FV100-101)
MCU board power supply
5 °C to 35 °C
20 % to 80 % (No condensation is allowed.)
40.0 mm (W) × 40.0 mm (D) × 14.6 mm (H)
13 g
Table 10 MCU board functional specifications
Item
Serves as the adapter used in combination with the BGM adapter and
header board to provide connection between the BGM adapter and evalu-
ation MCU and between the evaluation MCU and user system.
Serve for clock selection, clock supervisor selection, APB8 bus output se-
lection, C-pin setting, clock selection, product selection, low-voltage de-
tection setting, and voltage selection.
The jumper plugs on the MCU board can be used to make various settings
for low-voltage detection and clock selection.
The crystal oscillator mounted socket on the MCU board is used to supply
clock signals to the main clock (X0/X1) and subclock (X0A/X1A) pins on
the evaluation MCU from the MCU board.
Specification
2
MC-8FX MB95FV100-101
+ 3.3 V (UVcc)
(It supplies from a user system)
Description
+ 3.3 V