Fujitsu F2MC-8FX Series Operation Manual page 2

PREFACE
Thank you for purchasing the MCU board for F
ber: MB2146-301).
The MB2146-301 is a development support tool for developing and evaluating applied products
based on the F
This manual is intended for engineers who use the MB2146-301 (referred to below as the MCU
board) to develop applied products based on Fujitsu's F
ual describes how to handle the MCU board and its functions as well as the setting procedures.
Be sure to read this manual before using the MCU board.
* : F
■ Using the product safely
This manual contains important information required for using the MB2146-301 safely. Be sure to
read through the manual before using the product and follow the instructions contained therein to use
it correctly.
In particular, carefully read "Caution of the products described in this document" at the beginning of
this manual to understand the requirements for safe use of the product before using it.
After reading the manual, keep it handy for future reference.
■ Warranty and liability disclaimers
The specifications of the product are subject to change without notice.
In no event shall Fujitsu be liable for any loss or damages whatsoever directly or indirectly arising
out of the use of the product.
■ Product operating environment
The operating temperature for the product ranges from 5 °C to 35 °C and the operating relative hu-
midity from 20% to 80%. Avoid using it in a hot or humid environment and prevent condensation.
The product is a frameless PC board unit with all electronic components exposed. Therefore, neither
put anything on the product nor touch or let an electrically charged material contact a metal part of
it. Once the product has been powered, try to keep those objects away from it which can short-circuit
it or easily catch fire and burn. Use the product as horizontal as possible and avoid operating it at a
place exposed to strong vibration, dust, or explosive gas.
Note that using the product not in the above operating environment may unexpectedly cause personal
injury to the user (or another person if present near the product) or physical damage to properties
around the product.
You should also keep the packaging materials used for shipping the product. They work well as they
are when you transport the product again, for example, if it becomes out of order and needs to be
repaired.
■ Related manuals
You should refer to the following manuals as well:
2 MC-8FX family of microcontrollers manufactured by Fujitsu.
2 MC is the abbreviation of FUJITSU Flexible Microcontroller.
• Hardware Manual of the MCU used
• Data Sheet of the MCU used
• "MB2146-09 BGM Adapter Instruction Manual"
• Related "Header Board Instruction Manuals"
• "S
Workbench Operation Manual"
OFTUNE
• "S
Workbench USER'S Manual"
OFTUNE
2 MC*-8FX family MB95FV100-101 (model num-
2
MC-8FX family microcontrollers. The man-
i