Table of Contents
Advertisement
Section 4, Installing the Fuel System
4.4
Procedure
To complete the fuel system installation:
1
Install the inline fuel filter. The optimal location is on a
compartment wall next to the Oasis® Zephyr™ HW, inline
between the fuel tank and the heater.
2
Connect the fuel supply line to a dedicated pick-up fitting
on the main diesel fuel tank.
3
Inspect the supply fuel line for any loose connections or
damage. All fuel fittings must be airtight.
4
If desired, install a shut-off valve on the tank side of the
fuel filter to allow shutdown and filter service.
International Thermal Research
4-3
Advertisement
Table of Contents
Need help?
Do you have a question about the Oasis® Zephyr ™ Oasis Zephyr HW and is the answer not in the manual?