Access Control - TP-Link AC1600 User Manual

Chapter 6
Done!
6 2

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
How can I
do that?
3 ) Enter the MAC Address
paste the information from
device is connected to your network).
4 ) Enter the Description
5 ) Select the checkbox to enable this entry, and click OK.
Now MAC Filtering is implemented to protect your wireless
network.
Block or allow specific client devices to access my network (via
wired or wireless).
1 Visit http://tplinkmodem.net, and log in with the password
you set for the router.
2 Go to Advanced
Access Control.
manually. (You can copy and
Devices Online
of the device.
> Security > Access Control
Network Security
table if the
and enable
25