Table of Contents
Advertisement
4
Select the
Wireless Router Mode
effective.
Note: IPTV function is not supported in
T7 How to use the WDS Bridging function to extend my wireless
network?
My house covers a large area. The wireless network coverage of the router I'm using
(the root router) is limited. I want to use an extended router to extend the wireless
network of the primary router. Follow the steps to configure the modem router.
1
Visit http://tplinkmodem.net, and log in with password you set for the modem
router.
2
Configure the
LAN IP address
router. For example, the IP address of the root router is 192.168.0.1, the IP address
of the extended router should be from 192.168.0.2 to 192.168.0.254.).
3
Go to
Advanced
4
Select the check box to enable the WDS Bridging function.
5
Click
Survey
to scan all the AP devices and choose the root AP to be bridged.
option, then click
Wireless Router
of the modem router in the same subnet as the root
>
Wireless >Advanced Settings
Save
Mode.
page and locate the
to make the settings
WDS
section.
103
Hide quick links:
Advertisement
Table of Contents
