TP-Link AC1600 User Manual page 106

5 If you still cannot access the Internet, please restore your modem router to its factory
default settings and reconfigure your modem router by following the instructions
in Use Quick Setup
6 Please contact our Technical Support if the problem still exists.
T5 How to configure MAC Clone?
You can manually change the MAC address of the modem router. It is helpful when your
Internet access account provided by your ISP is bound to one specific MAC address,
in other words, your ISP just permits only one computer with the authenticated MAC
address to access the Internet. In this case, you can use MAC Clone to allow more
computers to access the Internet via the same account.
1
Visit http://tplinkmodem.net, and log in with password you set for the modem
router.
2 Go to Advanced
get the MAC Clone
• If you are using the computer with the authenticated MAC address to access
the modem router, please select
• If you know the authenticated MAC address, please select
Address and then enter the address.
3 Click OK to make the settings effective.
T6 How to use the modem router as a regular wireless router to share
my Internet?
The modem router also supports Wireless Router mode. If you already have a modem
or your Internet comes via an Ethernet cable from the wall, you can set up the modem
router as a regular wireless router to share the Internet.
1
Connect your modem router's LAN4/WAN port to the modem or the network port.
2 Visit http://tplinkmodem.net, and log in with password you set for the modem
router.
3
Go to Advanced
Wizard.
> Network > Internet
section.
> Operation Mode page.
page. Click the Add
Use Current Computer MAC
icon, and scroll down to
Address.
Use Custom MAC
102