TP-Link AC1600 User Manual page 81

Chapter 12
How can I
do that?
1 Visit http://tplinkmodem.net, and log in with the password
you set for the modem router.
2 Go to
Advanced >
configuration page where some interfaces can be grouped
together.
3 Click to
Add a new group.
4 Name the group.
5 Check the boxes of
Wi-Fi 2.4G network and
LAN interface respectively.
6 Click
Enable Group Isolation
disallow other devices from communicating with them.
7 Click OK to save the settings.
Specify Your Network Settings
Network > Interface Grouping
LAN1 and LAN3 in Available LAN. Here
Wi-Fi 5G network are viewed as a
to isolate working devices and
to open the
77