Schedule Your Wireless Function - TP-Link AC1600 User Manual

Chapter 12
4 On the client device, enter the modem router's PIN. (The default PIN is also labeled
on the bottom of the modem router.)
5
The WPS LED flashes for about two minutes during the WPS process.
6
When the WPS LED is on, the client device has successfully connected to the
modem router.
Note:
1. The WPS LED on the modem router will light on for five minutes if the device has been successfully added to the
network.
2. The WPS function cannot be configured if the wireless function of the modem router is disabled. Please make
sure the wireless function is enabled before configuring the WPS.
12 2 3

Schedule Your Wireless Function

You can automatically turn off your wireless network (both 2.4GHz and 5GHz) at time
when you do not need the wireless connection.
1 Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2 Go to Advanced
3
Select the 2.4GHz wireless network to configure. Toggle on the button to enable
the Wireless Schedule feature.
> Wireless > Wireless Schedule
Specify Your Network Settings
page.
72