TP-Link AC1600 User Manual page 10

Chapter 1
Name
Power
DSL
Internet
Wireless 2.4Ghz
Wireless 5Ghz
LAN
USB
WPS
Note:
1. If the DSL LED is off, please check your Internet connection first. Refer to
information about how to make Internet connection correctly. If you have already made a right connection,
please contact your ISP to make sure your Internet service is available now.
2. If the Internet LED is off, please check your DSL LED first. If your DSL LED is also off, please refer to
DSL LED is ON, please check your Internet configuration. You may need to check this part of information with
your ISP and make sure everything have been input correctly.
Status
On System initialization complete.
System initializing or firmware upgrading is in process. Do not
Flashing
disconnect or power off the modem router.
Power is off. Please ensure that the power adapter is
Off
connected correctly.
On DSL line is synchronized and ready to use.
Flashing The DSL negotiation is in progress.
DSL synchronization failed. Please refer to
Off
troubleshooting.
On The network is available with a successful Internet connection.
There is no successful Internet connection or the modem
Off router is operating in Bridge mode. Please refer to
troubleshooting.
On The wireless 2.4GHz band is working properly.
Off The wireless 2.4 GHz band is disabled.
On The wireless 5GHz band is working properly.
Off The wireless 5GHz band is disabled.
On At least one LAN port is connected.
Off No LAN port is connected.
On The USB device is identified and ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
Turns On when a WPS synchronization is established and
On/Off
automatically turns Off about five minutes later.
A wireless device is trying to connect to the network via WPS.
Flashing
This process takes about 2 minutes.
Get to Know About Your Modem Router
Indication
Connect Your Modem Router
for
Note 1
for
Note 2
for more
Note 1. If your
6