Ricoh L5160 Cip Training page 9

CIP Training L5160/L513
CIP Training C7200 series
Adjustment Settings for Operators Maintenance
Performing Maintenance Once Every 1.5 Months
This section describes how to clean the waste ink line.
Perform regular maintenance once every 1.5 months in order to use the machine safely for a long
time.
Cleaning the Waste Ink Line
Use flushing liquid to clean inside the waste ink line.
Clean the waste ink line regularly once every 1.5 months.
Be sure to clean the waste ink line after replacing the cleaning cartridge or when the following
message appears on the display:
"The waste ink line maintenance is required. Execute the waste ink line maintenance."
•
When cleaning the ink-station or the heads, or replacing the cleaning cartridge, make
sure to wear the attached goggles.
• When performing maintenance on the machine, make sure to wear the attached gloves.
•
If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes
immediately with running water. Consult a doctor if necessary.
•
If ink, flushing liquid, or displacement liquid are ingested, consult a doctor
immediately with Safety Data Sheet (SDS).
•
When removing jammed media or performing maintenance on the machine, avoid
getting ink, flushing liquid, and displacement liquid on your clothing. If ink, flushing
liquid, and displacement liquid come into contact with your clothing, wash the stained
area with water.
•
When removing jammed media, replacing media, or performing maintenance on the
machine, avoid getting ink, flushing liquid, and displacement liquid on your skin. If ink,
flushing liquid, and displacement liquid come into contact with your skin, wash the
affected area thoroughly with soap and water.
•
The supplied gloves are consumables. If they are damaged or lost, use polythene
gloves instead.
0