Ricoh L5160 Cip Training page 13

CIP Training L5160/L513
CIP Training C7200 series
Adjustment Settings for Operators Maintenance
6. Apply cleaning liquid to a cleaning stick, and then use it to wipe off any dirt on the caps
and their surrounding areas.
• If ink adheres strongly to the edge of the cap, make sure to remove it. Do not wipe off
ink using excessive force. Otherwise the edge of the cap might deform.
• If there is any ink dirt around the caps, wipe the dirt off.
• Wipe off completely so that no cleaning liquid remains.
7. After cleaning, confirm that the mesh on the cap has not come off.
If the mesh comes off, push in the cap.
8. Raise the lock lever located inside of the right cover on the left, and then close the right
cover.
The carriage moves to the home position.
9. After the "Has head cleaning been performed?" message is displayed, press [Cancel].
0
DWT300
1 1. Edge of the cap
2. Around the cap
2
DWT301
1. Mesh
1
DWT302