Ricoh L5160 Cip Training page 19

CIP Training L5160/L513
CIP Training C7200 series
Adjustment Settings for Operators Maintenance
Cleaning the Pre-heater
The pre-heater is susceptible to becoming dirty with bits of media. Clean the pre-heater regularly.
1. Lift and secure the pre-heater cover on the back of the machine.
2. Wipe off dirt on the pre-heater.
Wipe the pre-heater with a soft, dry cloth. If this does not remove the dirt, wipe the pre-
heater with a damp and tightly wrung cloth. If a damp cloth still does not remove the dirt,
try using a mild detergent. Wipe the pre-heater with a dry cloth to remove the moisture,
after using a damp cloth.
3. Return the pre-heater cover to its original position.
Cleaning the Roll Holder and Guide Groove
Remove dust in the roll holder/spool holder rail groove using an item such as an air duster.
0
1
1. Pre-heater
DWT309
EDP005