Ricoh L5160 Cip Training page 14

CIP Training L5160/L513
CIP Training C7200 series
Adjustment Settings for Operators Maintenance
Performing Maintenance Once a Year
This section describes how to clean the area around the print heads.
To use the machine safely over its lifetime, clean the caps each time you replace the nozzle
cleaning cartridge and clean the area around the print heads annually.
Cleaning the Area around the Print Heads
Clean the caps each time you replace the nozzle cleaning cartridge and clean the area around
the print heads once a year or if nozzle defects are not resolved by head cleaning or air purging.
Ink clogging defects may be caused by dirt on the caps or the area around the print heads.
Be sure to clean the caps and the area around the print heads when the following message
appears on the display:
"The area of the print head needs cleaning. Clean the area of the print head."
• When cleaning the ink-station or the heads, or replacing the cleaning cartridge, make
sure to wear the attached goggles.
• When performing maintenance on the machine, make sure to wear the attached gloves.
• If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes
immediately with running water. Consult a doctor if necessary.
•
If ink, flushing liquid, or displacement liquid are ingested, consult a doctor
immediately with Safety Data Sheet (SDS).
•
When removing jammed media or performing maintenance on the machine, avoid getting ink,
flushing liquid, and displacement liquid on your clothing. If ink, flushing liquid, and displacement
liquid come into contact with your clothing, wash the stained area with water.
•
When removing jammed media, replacing media, or performing maintenance on the
machine, avoid getting ink, flushing liquid, and displacement liquid on your skin. If ink,
flushing liquid, and displacement liquid come into contact with your skin, wash the
affected area thoroughly with soap and water.
•
The supplied gloves are consumables. If they are damaged or lost, use polythene
gloves instead.
0