Ricoh L5160 Cip Training page 11

CIP Training L5160/L513
CIP Training C7200 series
Adjustment Settings for Operators Maintenance
8. Raise the lock lever located inside of the right cover on the left, and then close the right
cover.
9. Press [Confirm].
The carriage moves to the home position, and then perform waste ink line maintenance.
10. Press [Confirm].
Cleaning Each Time You Replace the Nozzle Cleaning
Cartridge
This section describes how to clean the caps.
Perform regular maintenance each time you replace the nozzle cleaning cartridge so the
machine may be used safely for an extended period.
Cleaning the Caps
Clean the caps and the area around the print heads each time you replace the nozzle cleaning
cartridge or if nozzle defects are not resolved by head cleaning or air purging. Ink clogging
defects may be caused by dirt on the caps.
•
When cleaning the ink-station or the heads, or replacing the cleaning cartridge, make
sure to wear the attached goggles.
• When performing maintenance on the machine, make sure to wear the attached gloves.
•
If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes
immediately with running water. Consult a doctor if necessary.
•
If ink, flushing liquid, or displacement liquid are ingested, consult a doctor
immediately with Safety Data Sheet (SDS).
0
DWT184