Table of Contents
Advertisement
CIP Training L5160/L513
CIP Training C7200 series
Adjustment Settings for Operators
Maintenance
A
1
8. When dust is built up in the surface of the media sensor on the underside of the carriage,
wipe off the dirt with a cotton swab, etc.
1
Do not touch the colorimetric sensor as cleaning may cause the sensor to become misaligned.
9.
Use the two screws removed in Step 6 to fix the left cover.
10.
Raise the lock lever located inside of the right cover on the left, and then close the right
cover.
The carriage moves to the home position.
11. After the "Has head cleaning been performed?" message is displayed, press [Execute].
0
1. Nozzle faces
DWT306
1. Colorimetric sensor
2. Media sensor
2
DWT307
DWT073
Advertisement
Table of Contents
