TEC B-370 Series Maintenance Manual page 39

6. DIAG. TEST OPERATION
6 Sensor 1 Check
SENSOR1 0 0 0 0 0 0 0 0 , 1 0 1 1 0 0 1 1
Cutter home position switch status
Rewind full sensor status
0:
1:
Slit sensor #1 (ribbon rewind) status
0:
1:
Slit sensor #2 (ribbon feed) status
0: The detecting point is
positioned outside the slit.
1: The detecting point is
positioned inside the slit.
Fixed to 0
Strip sensor status
0: Without label
1: With label
Ribbon end sensor status
0: Transmissive (with ribbon)
1: Non-transmissive (ribbon end)
Fixed to 0
6-9
Head up switch status
0: Head opened
1: Head closed
Fixed to 1
0: Home position
1: Other position
Normal
Excess
The detecting point is positioned
outside the slit.
The detecting point is positioned
inside the slit.
EM18-33012
6.2 SELF TEST MODE