Attaching The Frame Upper Bracket; Attaching The Upper Bracket - Air Lift LoadLifter 5000 Ultimate Installation Manual

ATTACHING THE FRAME UPPER BRACKET

1 . Attach the frame upper brackets, (B

ATTACHING THE UPPER BRACKET

1 . Set the assembly onto the axle with the 90° swivel air fitting pointing inward towards the
NOTE If necessary, jack up the chassis to gain clearance to set the assembly into position.
2 . Align the slots in the frame upper bracket and bellow upper bracket . Attach the two with
3 . Push the top of the air spring forward or backward and align the upper and lower bracket
6
Tighten securely (fig. 5).
4WD
fig. 5a
M-10 Button
head screws (P)
center of the truck .
the 3/8" carriage bolts (Q), flat washer (I) and nyloc nut (H) (fig. 6).
so they are parallel .
Frame upper
bracket (B 1 )
Flat washer (I)
LoadLifter 5000 Ultimate
1 ) to the frame using M-10 button head screws (P) .
Frame
Jounce
bumper
bracket
Upper bracket
(B 1 )
3/8" Carriage
bolt (Q)
fig. 6
2WD
fig. 5b
M-10 Button
head screws (P)
Bellow upper
2
bracket (B )
Nyloc nut (H)
MN-822