Server Express 07737 Manual page 4

MODEL 07737
PART QTY DESCRIPTION
07383 1 PUMP DOME, BLACK
07798 1 LARGE PINCH VALVE
07389 1 PUMP HOUSING ASSEMBLY
07796 1 DISCHARGE FITTING, .256, MED.
TROUBLESHOOTING
SERVER PRODUCTS
LIMITED WARRANTY
Server Products equipment is backed by a
two-year limited warranty against defects in
materials and workmanship.
For complete warranty information go to:
www.Server-Products.com
HELP or ORDERING REPLACEMENT PARTS
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
262.628.5600 | 800.558.8722
SPSALES@SERVER-PRODUCTS.COM
Page 4
TIP: Squeeze the pinch valve
open before installation to
ensure it isn't stuck shut.
DOME 07383
PINCH VALVE
DIFFICULT TO ATTACH PARTS?
• Wet parts with clean water to help fit.
PRODUCT DOESN'T PUMP?
• Ensure pinch valve is inserted in housing.
• Ensure connector is snapped fully in place to
fitment in pouch.
• Ensure pump is properly installed in unit.
• Clean pump thoroughly.
DOME POPS OFF?
• Clean thoroughly. Food residue could prevent
a tight seal between dome and housing.
• Ensure dome edges are flush with housing.
GENERAL SERVICE,
REPAIR OR RETURNS
Before sending any item to Server Products for service,
repair, or return, contact Server Products customer
service to request a Return Authorization Number.
Merchandise must be sent to Server Products with this
number. Service is extremely prompt. Typically, units
are repaired and ship out within 48 hours of receipt.
Merchandise being returned for credit must be in new
and unused condition and not more than 90 days old
and will be subject to a 20% restocking charge.
Please be prepared with the Part Numbers for your
items. Individual part numbers are listed above.
07798
PUMP HOUSING
ASSEMBLY
07389
DISCHARGE
FITTING
07796
Manual #01750-RevB 061815