Advertisement
ASSEMBLY
1
INSERT PINCH VALVE
into pump housing.
TIP: Squeeze the pinch valve
open before installation to
ensure it isn't stuck shut.
2
INSTALL DOME
Slide loop of dome up the housing tube.
Press dome into housing fully.
Ensure valve flap covers bottom opening.
3
INSERT DISCHARGE FITTING
into pump housing discharge tube.
Place loop of fitting around peg on end of
discharge tube to secure.
Page 2
WASH ALL PARTS
PROPERLY BEFORE USE.
See page 3.
Advertisement
Need help?
Do you have a question about the Express 07737 and is the answer not in the manual?
Questions and answers