Overview Of Machine - NewArc RT2500 Operational Manual

1.4 Overview of Machine

Front View
Power source front panel layout
1. Remote control socket
2. Overload indicator
3. Mode switch
4. Current control
5. Power indicator
6. - ve weld terminal.
7. + ve weld terminal.
8. Off/On switch
10
RT2500
SECTION 4 — OPERATION
4.1 Description of controls
1 Remote control socket - For connection of external remote
control or TIG300.
2 Overload indicator - Indicates duty cycle has been ex-
ceeded and the thermostat inside the machine has oper-
ated.
3 Mode switch - Selects the welding mode.
4 Current control - Adjusts the machines output current.
5 Power indicator - indicates mains power, lights up when
machine is switched on.
6 -ve weld terminal.
4.2 Operatio
4.2.1 MMA W
•
For straight
holder to the
turn lead to t
larity welding
•
Turn the mod
MMA mode.
•
Adjust the cu
for the size an
• Turn the mai
indicator will
•
The R2500 is
within the cu
5.0mm.
The R2500 shou
or cutting elec
4.2.2 MMA W
•
Select weldin
•
Turn the mod
•
Plug the con
remote contr
•
Plug the rem
cable.
•
Adjust the cu
mended sett
trode being u
does not hav
the R2500 all
•
Turn the main
ready to wel
4.2.3 TIG We
Do not use the
understood th
•
Connect the
the TIG300 m
•
Turn the mod
welding pro
•
Select weldi