NewArc RT2500 Operational Manual page 11

1. Remote control socket -
For connection of external remote control or TIG300.
2. Overload indicator
Indicates duty cycle has been exceeded and the thermostat inside the machine has operated.
3. Mode switch
Selects the welding mode.
4. Current control
Adjusts the machines output current.
5. Power indicator
Indicates mains power, lights up when machine is switched on.
6. Negative weld terminal
Main welding power output connector, negative polarity.
14. Positive weld out connector
7. Positive weld terminal.
11
RT2500