Advertisement
Quick Links
Advertisement
Related Manuals for BROSA Field Double Open Shelf
Summary of Contents for BROSA Field Double Open Shelf
- Page 1 Field Double Open Shelf A S S E M B LY G U I D E...
- Page 2 F O R Y O U R S A F E T Y Lift, don’t drag. This protects Check the assembly guide your floor and product. for required components. Assembly requires 2 people. Assembling this product on It's always easier with a a soft surface protects its friend.
- Page 3 Components Before you get started, check you have all of the pieces below. If anything’s missing, we’ll sort it out right away. Simply visit: www.brosa.com.au/pages/product-return-and-parts-request ① Shelf x 4 ② Stand x 2 ③ Brace x 4 Hardware x 16...
- Page 4 Step 1 ② ③ Connect both stands with the braces using the short bolts as shown in the diagram below. ② ③ ②...
- Page 5 Step 2 ① Align a shelf with the structure formed in Step 1. Make sure the bolt holes overlap. Fit a long bolt into the hole and tighten it with the Allen key C. Repeat this for the remaining holes to fix the shelf in place and then repeat the process for the remaining shelves.
- Page 6 Step 3 Flip the completed piece of furniture and place it upright in its desired location. Enjoy your new Field Double Open Shelf!
-
Page 7: Anti-Tip Kit Installation
Anti-Tip Kit Installation It is not mandatory but strongly recommended to install anti-tip kit for safety. Hardware (M4 x 17) Wall Fixings Because of the variety of wall compositions, we can’t provide you with appropriate wall fixings. Please identify your wall composition and contact your local hardware store to get the appropriate fixings. -
Page 8: What You Need
What You Need Step 1 Attach the bracket securely to the back top of the product using the short screws provided. - Page 9 Step 2 Determine where the piece is to be placed and mark locations on the wall for the mounting bracket using a pencil. Move the furniture out of the way so that the bracket can then be mounted to the wall.
- Page 10 Step 3 Wall fixings are not provided. Attach the mounting bracket to the wall using appropriate fasteners based on your wall composition.
- Page 11 Step 4 Lace the nylon strap down through the brackets. Slide the thin end of the strap through the receiving end on the nylon strap. Pull to tighten the piece of furniture snug against the wall.
- Page 12 Warning Serious or fatal crushing injuries can occur from furniture tip-over. Never allow children to climb or play on furniture.
- Page 13 With that in mind, the following tips can help prolong the life of your Brosa veneer furniture to help them look beautiful for years to come. Assembly 1. Assemble furniture using our Assembly Guides. You can find them at support.brosa.com...
- Page 14 3. Do not use any abrasive cleaner or harsh detergent as this can damage the surface of the furniture. 4. Avoid using spray polishes as they contain silicones which may spoil the furniture’s surface. 5. Make sure all surfaces are protected from heat and liquids by mats and coasters.