3xLogic VISIX VX-4M-OD3-RIAWD Quick Start Manual page 11

5. If routing through the bottom of the camera, skip this step. If routing cabling through the side of the
camera, remove the side routing hole plug from the camera housing and dispose of it.
6. Pull the remaining cables through the weatherproof gaskets.. Always pull the cabling through gently to
avoid tearing the gasket. Be sure to dispose of the RJ-45 piercing cap.
7. Fasten the camera housing to the mounting plate using the supplied Torx key.
.
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
S-Series Camera Quick Start Guide | VX-4M-OD3-RIAWD
11