Fill The Tank; Carpet Cleaning - Bissell READYclean 39Q6 User Manual

O
perations
before you clean
1. move furniture to another area if
cleaning an entire room. (optional)
2. Vacuum carpet thoroughly.
3. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the
corner farthest from your exit.
4. pre-treating (optional) Pre-treat
stubborn stains and highly soiled carpet
in hallways and other high-traffic areas.
4a. Generously spray BISSELL Tough Stain
Precleaner evenly over soiled area.
caution: do not oVeR Wet caRpet
4b. Wait 3-5 minutes before deep cleaning.

fill the tank

1. Remove the solution tank by lifting
it straight up, then away from the
lower body.
2. Unscrew the black cap at the
bottom of the solution tank.
3. fill with hand hot (not boiling) tap
water to the WATER line. fill the rest
of the tank with BISSELL 2X formula
to the foRmULA line. Replace and
tighten the black cap.
caution: do not microwave
or boil water before filling.
4. Place solution tank on lower body.

carpet cleaning

1. Plug into proper outlet.
2. Adjust the retractable handle by turning
counterclockwise and lifting the handle
up. Turn clockwise to secure.
3. With foot press the red power lever,
located on the back of the machine.
note: Handle must be in the full
upright position before cleaning.
4. With foot, press the recline lever
located next to power lever.
5. Cleaning Strokes. While pressing the
spray trigger, make one slow forward
wet pass and another one back.
caution: do not overwet.
6
w w w . b i s s e l l . c o m
WaRning:
To reduce the risk of fire, use only
BISSELL advanced deep cleaning
formula for full size machines in
your deep cleaner. Use of clean-
ing formulas that contain lemon
or pine oil may damage this
appliance and void the warranty.
Chemical spot cleaners or solvent-
based soil removers should not
be used. These products may
react with the plastic materials
used in your deep cleaner
causing cracking or pitting.
1.
3.
2.
2.
4.
3.
Power
4.
Recline