Fill Smartmix/Formula Tank; Fill The Water Tank - Bissell 8910 SERIES User Manual
Hide thumbs
Also See for 8910 SERIES:
- User manual (21 pages) ,
- User manual (25 pages) ,
- User manual (25 pages)
Table of Contents
Advertisement
O
peration
Fill the water tank
1.
Release the handle and lay the machine
handle back to access the tank.
2.
Remove the tank from the base of the
machine by lifting the tank carry handle.
3.
Carry like a bucket to the sink. Rotate the handle for-
ward to unlatch the lid. Lift off and set the lid aside.
4.
Fill up the bladder with clean hand hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
5.
Replace the top of the tank by matching the
lid and tank edges. Handle must be in the
forward position in order to replace lid. Rotate
the handle to the carrying position to latch the
lid.
Note: Remember to secure the lid and test to make
sure it is secure before picking up the Tank.
6.
Place tank into machine base, seating firmly in place.
Rotate tank handle back into latched position. Bring
machine handle back into upright position.
Fill the formula tank
1.
Lift the formula tank up and out of the machine base.
2a. Fill the formula tank by first unscrewing the cap
and insert. Always use genuine BISSELL formulas
to maximize cleaning and for the safety of your
machine. Fill formula up to the line and replace
the cap and insert. Place formula tank into the
slot in the side of the machine for a snug fit.
2b. If using the BISSELL 3X Fiber Cleansing
Advanced Formula: Add 3 capfuls of 3X Fiber
Cleansing Advanced formula to the formula
tank, and then fill with hot water to the line.
Note: Make sure grommet is properly seated to
avoid leaking.
Choose the SmartMix setting
Simply choose one of the 3 settings
• Heavy Traffic
• Normal
• Water Rinse
and the ProHeat will adjust the right amount of
cleaning solution to mix with the heated water to
fit your cleaning need.
NOTE: When your cleaning job is finished, the
formula can be stored ready to use in your
machine for the next time!
1.
2.
3.
4.
5.
1.
2.
WARNING:
To Reduce the Risk of Fire and
Electric Shock due to internal
component damage, use only
BISSELL cleaning fluids intended
for use with the deep cleaner.
SmartMix Dial
Page 9
Hide quick links:
Advertisement
Table of Contents
