Fill The Water Tank - Bissell ProHeat 1699 Series User Manual

O
peration

Fill the water tank

1.
Release the handle and lay the machine
handle back to access the tank.
2.
Remove the tank from the base of the
machine by lifting the tank carry handle.
3.
Carry like a bucket to the sink. Rotate the handle
forward to unlatch the lid. Lift off and set the
lid aside.
4.
Fill up the bladder with clean hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
5.
Replace the top of the tank by matching the
lid and tank edges. Handle must be in the
forward position in order to replace lid. Rotate
Note: Remember to secure the lid and test to make
sure it is secure before picking up the Tank.
6.
Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position. Bring machine handle back into
upright position.
Fill the SmartMix/formula tank
1. Lift the formula tank up and out of the
machine base.
2. To fill the formula tank, first unscrew the cap
and Insert. Always use genuine BISSELL formulas
to maximize cleaning and for the safety of your
machine. Fill formula up to the line and replace
the cap and Insert. Place formula tank back into
the base of machine, making sure it is seated
securely.
Note: If bottle leaks, check for proper positioning
of red grommet and straw.
Choose the SmartMix setting
Simply choose one of the 3 settings
• Heavy Traffic
• Normal
• Water Rinse
and the ProHeat will adjust the right amount of
cleaning solution to mix with the heated water to
fit your cleaning need.
NOTE: When your cleaning job is finished, the
formula can be stored ready to use in your
machine for the next time!
w w w . b i s s e l l . c a
1
3
5
1
WARNING:
To Reduce the Risk of Fire and
Electric Shock due to internal
component damage, use only
BISSELL cleaning fluids intended
for use with the deep cleaner.
When filling bottle or
storing unit, set
dial to:
WATER
RINSE
SmartMix Dial
8 0 0 . 2 6 3 . 2 5 3 5
2
4
6
2
9