Advertisement
How the air conditioner works
MAINTENANCE INSTRUCTION
AUTO mode
When you set the air conditioner in AUTO mode, it will
automatically select COOL or FAN mode operation
depending on the temperature you have selected and
the room temperature.
The air conditioner will control the room temperature
automatically around the temperature point set by you.
If the AUTO mode is uncomfortable, you can set
desired conditions manually.
COOL mode
The temperature setting are adjustable between 17° C
to 30° C. Cooling begins automatically when the room
temperature around 1° C above the set point, and stops
when the room temperature around 1° C below the set
point. The fan will remain running.
SLEEP mode
When you press SLEEP button on the remote controller
during COOL or AUTO mode, the air conditioner will
automatically increase (COOL) per hour for the first 2
hours, then hold steadily for remain running.
DRY mode
The fan speed will be automatically controlled under the
dry mode.
During the dry mode, if the room temperature is lower
than 10° C, the compressor will stop operation and
restart until the room temperature is above 12° C.
Cleaning the Grille, Case and Remote Controller
Turn the unit off before cleaning. To clean and wipe
with a soft and dry cloth. Do not use bleach or
abrasives.
NOTE: Supply power must be disconnected before
cleaning the indoor unit.
CAUTION
Wipe the indoor unit with a dry cloth if it is dirty.
Do not use a chemically treated cloth or duster to clean the
unit.
Do not use benzine, thinner, polishing powder, or similar
solvents for cleaning. These may cause the plastic surface
to crack or deform.
Cleaning the air filter
A clogged air filter reduces the cooling efficiency of this
unit. Clean the filter every 2 weeks is recommended.
1. Lift the indoor unit panel up to an angle until a click
sound is heard.
8
Advertisement
