Advertisement
Air flow direction control
Adjust the air flow direction properly, otherwise it might
cause discomfort or cause uneven room temperatures.
Adjust the horizontal louver by using the remote controller.
Adjust the vertical louver manually.
To set the vertical air flow direction
Perform this function while the unit is in operation.
Use the remote control to adjust the air flow direction.
The horizontal louver changes approximately 6 degree in
angle for each press, the louver can also be set to swing up
and down automatically.Please refer to the <<REMOTE
CONTROLLER USER MANUAL>> for details.
IMPORTANT: Do not put your fingers into the panel of the
blower and suction side. The high-speed fan inside may cause
injury.
CAUTION
Do not operate the air conditioner for long periods with the
air flow direction set downward in COOL or DRY mode.
Otherwise, condensation may occur on the surface of the
horizontal louver causing moisture to drop on to the floor or
on furnishings.
When the air conditioner is switched on immediately after it
was stopped, the horizontal louver might not move for
approximately 10 seconds.
Open angle of the horizontal louver should not be set too
small, as COOLING performance may be impaired due to
too restricted air flow area.
Do not move the horizontal louver manually. Otherwise the
horizontal louver will be out of sync.
During operation, do not operate with horizontal louver in
closed position to block the air outlet.
When the air conditioner is connected to the power (initial
power), the horizontal louver may generate a sound for 10
seconds, this is a normal operation.
7
Advertisement
