Cleaning Rollers - Paitec MX-9000 User Manual

5-2 Cleaning Rollers

Since Pressure seal forms leave paper dust, ink and toner residues, it is very
important to occasionally clean the surface of the each roller to maintain its best
condition for better performance.
1. Paper dust
- Use small air cleaner or dust remover.
2. Cleaning fold rollers
- Open the safety cover and slide out the upper cassette. With a piece of
soft cloth, use Denatured Alcohol to remove any ink contamination or
toner residues on the surface of the fold rollers.
Caution - Please do not use any other substance when cleaning the surface of
the fold rollers as it may damage the rubber.
3. Cleaning press rollers
- A professional's aid is necessary to clean press rollers. Try to clean it by
an engineer's help, if possible. If you are going to do it by yourself, please
remove (unplug) the power.
- Remove conveyor wheel holder, lower press roller cover and upper press
roller cover in the picture below.
- Two rollers and inner lower press roller shown in picture A can be cleaned.
- Inner upper roller can be cleaned like picture B.
Picture A
- 26 -
MX-9000 User Manual
Picture B