Cleaning - Paitec ES2500 User Manual

User Manual

Cleaning

Since pressure seal forms leave paper dust as well as ink and toner residues, it
is very important to occasionally clean the surface of the each roller to ensure
optimum performance.
1
Paper Dust
Use small air cleaner or dust remover
2
Pick-up and Fold rollers
Clean the feed roller as well as the aluminum and rubber rollers inside the folding unit
with roller cleaning fluid. Do not use oil as this will damage the surface of the rubber.
3
Sealing Rollers
With general use, toner will build up on the pressure rollers. Check the rollers for build
up of toner and clean on a regular basis using a suitable roller cleaning fluid. The
degree of build up will vary according to the type of printer, toner & fuser used.
Do not use any other substance to clean the surface of the fold rollers as
it may damage the rubber.
Please contact your service tech for further details on suitable cleaning
solutions to be used.
ES2500
14
Maintenance
Ver. 01